Torsion Spring Replacement Cost
Last updated: October 30, 2026 · Prices checked October 30, 2026
Garage door torsion spring replacement cost runs $75–$150 for the spring itself, and $150–$350 installed per door by a professional. Torsion springs — the ones wound on the shaft above the door — are the stronger, longer-lived design, and the most dangerous component in your garage. This page prices them properly: by door, by pair, and by the factors that move the quote.
Torsion spring: $75–$150 each (part). Installed on one door: $150–$350; two doors: $275–$425.
National range, researched from published sources. Prices checked October 30, 2026.
Torsion spring cost breakdown
| Item | Typical price |
|---|---|
| Torsion spring (part, each) | $75–$150 |
| Labor (hourly) | $75–$150 / hour |
| Labor (flat per job) | $75–$150 |
| Service call | $50–$75 |
| Installed, 1 door | $150–$350 |
| Installed, 2 doors | $275–$425 |
| Installed, 3 doors | $350–$700 |
What makes one torsion spring cost more than another
- Door weight. The spring is matched to the door: a heavy insulated or wood door needs thicker wire and a longer spring — more steel, more money.
- Cycle rating. Standard springs are rated ~10,000 cycles. High-cycle (20,000–30,000+) springs cost more per part and far less per year of life.
- Single vs. pair. Two-spring doors: replace both (see the pair logic in cost to replace a garage door spring).
- Coatings. Galvanized or powder-coated springs resist the rust that shortens spring life in humid and coastal climates — a modest premium that pays in Florida-style humidity.
Torsion vs. extension, on price
Extension springs are cheaper parts ($50–$100 vs $75–$150), but torsion springs typically last longer, balance the door better, and contain their failure on the shaft instead of snapping across the garage. Switching an extension-spring door to torsion costs $400–$825 — the full comparison is in our torsion vs. extension springs guide. For the whole-job picture across all spring types, see garage door spring replacement cost.
How to recognize a broken torsion spring (from a distance)
A visible gap of a couple of inches in the coil above the door, a loud bang you may have heard hours earlier, and a door that the opener lifts only a few inches — or not at all. Do not pull the emergency release and try to muscle the door up: without the spring, a door can weigh 150–300 lb and fall without warning. Keep people and pets clear and call a pro; if it's after hours, the emergency premium is $100–$300. Estimate your job in the garage door cost calculator.
Frequently asked questions
How much does a torsion spring replacement cost?+
The spring itself is $75–$150; installed by a professional, the job runs $150–$350 per door (Angi 2026), including labor and typically the service call.
Why is torsion spring labor not cheaper if the part is only $100?+
Because the work is the dangerous part: winding a torsion spring means loading it with the force that lifts a 150–300 lb door, using winding bars and training. The $75–$150 labor charge buys that skill and the company's insurance.
How many cycles should I buy?+
Count your door's daily use. Four cycles a day wears out a 10,000-cycle spring in about 7 years; a 25,000-cycle spring stretches that past 15. The per-part premium is small next to a second labor bill.
Can one torsion spring be replaced on a two-spring door?+
It can, but it shouldn't: the springs age together, and mismatched old/new springs unbalance the door and strain the opener. Replace the pair in one visit.